Bellm TCs

	In 2006 I had the pleasure of setting up two .375 H&H Magnum handguns with my machined in muzzle brake, one of which a client took to Africa.
	Features of this gun that I did: Trigger Job Bellm Machined in Muzzle Brakes Even with 300 gr. solids, with my highly effective muzzle brake machined into the barrel the .375 H&H Mag. is quite manageable for the demanding conditions of dangerous big game hunting. T'BOSS, The Bellm OH SHIT! Saver Note he was usually shooting with gloved hands and shooting a belted mag case, which sometimes will not be caught by the extractor either loading in a hurry or unloading. This client's pending hazardous conditions are what prompted me to mill better cartridge access clearance into the breech end of the barrel and is the source of the original T'BOSS. Named for the expletive most apt to be heard when a gun becomes disabled at a critical moment, T'BOSS is both a convenience for the average shooter and potentially a life saver when the extractor does not catch the extraction groove! It allows access to the extraction groove of the cartridge and removal of the case in the event the case rim ends up in front of the extractor as can easily happen with the belted mag. cases in particular. Barrel Work Prices and Information This barrel was rechambered to .375 H&H Mag. from a TC factory 26" .375 JDJ heavy rifle barrel, cut back to 18," and my brake was machined into it. Iron sights were also installed and sighted in here. Barrel was drilled and tapped for short handgun forend screw spacing. Here are some of the results of his trip. How its done with shooting stix. Shot being fired is on the lion above.