Bellm TCs

	Upgrade your TC Encore's or G2's performance with a Bellm Custom Spring Kit of your choice and save money. The kit includes a combination of your choice of weight of Bellm Custom Trigger/Sear Spring, a Bellm Custom "Speedlock" Hammer Spring, and a Bellm Custom Heavy Duty Locking Bolt Spring. This kit addresses three issues: 1) A tighter lockup by applying more force to the barrel's locking bolts. 2) Your choice of trigger/sear spring for a lighter trigger pull weight. 3) Our much stronger 51# "Speedlock" hammer spring for surer ignition. As described on the Heavy Duty Locking Bolt Spring page, the top surfaces of the locking bolts are on a slight angle. Thus more force to the locking bolts ensures a tighter lockup. This is especially important in Encore barrels which have: 1) A larger surface area on the locking bolts, 2) Far greater forces applied to the locking bolts from both the weight, and thus leverage, of the heavier Encore barrels and the far greater forces exerted from much higher intensity rounds than fired in the Contender or G2, YET... 3) The Encore uses the same exact factory issue locking bolt spring as the Contender & G2. Your choice of Bellm Custom Trigger/Sear Spring in the one of the four most popular tensions, #1, #2, #3, in the weight range that is normally just a "drop-in" installation for novices and experienced gunsmiths alike. Sear Springs #4,#5,#6,#7 require modifying the sear notch.
	TC Encore/ ProHunter & G2 Spring Kits---- SK $14.95 "Drop-In" spring kits for Encore & G2 accuracy and reliability. Kit consists of one each of Bellm Heavy Duty Locking Bolt Spring, choice of Bellm Encore/G2 Trigger/Sear Spring, and choice of Bellm "Speedlock" Hammer Spring. Separately, these springs total $18.20. Get them as a kit for $14.95.    TC Encore/ ProHunter & G2 80 ARK FINE $19.95 Use this economical companion to our 80 degree Diamond EZE Lap to polish the sear notch after modification. Matching 80 degree angle on this custom cut Hard Arkansas Stone maintains correct sear angle while polishing. Gives a finish superior to Arkansas stones.    TC Encore-ProHunter-G2 80 EXTRA FINE $24.95 Same as above but EXTRA FINE