Contender Firing Pin Return Spring 2 pack
contender g2 firing pin return spring 2ea no.12
G2's and Contenders have a centerfire and rimfire firing pin and there fore two are needed per frame. Introductory Priced, 2 springs per package. In stock and ready to ship. An essential spring to replace periodically or whenever replacing firing pins.
TIPS: Anyone can replace, no gunsmith needed. With barrel removed from receiver, hold the interlock back on the inside right of frame on G2 or middle of inside on Contender to allow cocking of hammer. Remove flat headed Firing pin bushing screw, located on outside of frame directly below where hammer impacts firing pin. The firing pin bushing, firing pins, and firing pin return springs removes from inside of frame as unit, if stuck due to improper cleaning I use a small 1/16 pin punch through firing pin bushing screw hole and lightly tap out being careful not to damage threads inside bushing. Now is a great time to clean and replace worn firing pin return spring with BELLM Contender firing pin return springs also sold below. Rimfire firing pin goes on top, centerfire on bottom. Rimfire has a flat tip, centerfire is pointed.Note in the picture the different SHAPE of the bell of the firing pin, these have a rounded bell where the G2 and newer Contender frames have a cone bell. Firing pin on top is rimfire (flat tip) and bottom is Centerfire.
[ITEMPRICE]