Available in three lengths, 3/8", 5/8" and 7/8" be sure to check for the lengths you need. These are a stainless steel allen head cup screws for the G2 and Contender. If you have a length you need and you don't see it, contact us so we can quote delivery and length. NOTE: Do not use a screw that is too long & projects too far into the barrel channel. If the screw bottoms out on the flat milled in the barrel, it can literally pull the dovetail lock out of the slot, bending the ears of the slot open. You have to put the screw in the forend hole, site down the channel, and make sure the screw is not more than about .050" into the channel. Slots are typically about .070" deep in the barrel.
Also available is a 6 pack of these screws, 2 of each length.