ESSENTIAL UPGRADE!HD FIRING PIN for T/C Encore, ProHunter, Endeavor
Add this to complete a spring kit upgrade on encore, we also sell this with a new HD firing pin return spring as a kit.
PROUDLY DESIGNED AND MANUFACTURED by Bellm TCs IN THE USA!
New Bellm HD firing pins are made to last from S7 steel. S7 is a shock resisting tool steel with excellent toughness and high strength, along with medium wear resistance. It has maximum shock resistance and high compression strength, which gives it good deformation resistance in use, while retaining good toughness. An ideal metal choice for a firing pin, very difficult to machine without experience requiring a special heat treatment after machining. Precision manufactured to an incredible tolerance on swiss screw machines, our firing pins are not only a direct upgrade but virtually un breakable.
TIPS: Anyone can replace, no gunsmith needed. With barrel removed from receiver, hold the interlock back on the inside right of frame to allow cocking of hammer. Remove 7/64 inch allen headed Firing pin bushing Screw, located on outside of frame directly above where hammer impacts firing pin. The firing pin bushing, firing pin, and firing pin return spring removes from inside of frame as unit, if stuck due to improper cleaning I use a small 3/32 pin punch through firing pin bushing screw hole and lightly tap out being careful not to damage threads inside bushing. Now is a great time to clean and replace worn firing pin return spring with BELLM HD firing pin return spring also sold separately or together with the firing pin.
[ITEMPRICE]