This is one of our best deals on a kit and a must for anyone looking to improve trigger pull on their T/C G2
Basic Trigger Job Tool and Spring Kit for G2, (encore separate kit) NOT for old style Contender
Save a bunch of money, get the right Bellm custom tools for the job, have the satisfaction of knowing how the work was done saving you time and money.
Tools Included:
1-Sear Spring Installation Pliers, 1-3/32'' Pin Punch,
1-80 degree Diamond EZE Lap for altering the sear notch,
1-EXTRA FINE Grit Black Hard Arkansas stone for polishing the sear notch,
1-Bellm Custom trigger/sear spring, choose weight of spring above drop down.
1-Bellm Custom SPEEDLOCK hammer spring (44# Speedlock Hammer Spring w/spring kits #1 - #4, #51 w/spring kits #5 through #7)
1-Bellm Custom Heavy Duty barrel lug locking bolt spring.
2- HD G2 Firing Pin Return Spring
1- G2 Trigger Guard Return Spring
#1 spring for a pull weight of approx 3 1/2 to 4 pounds #2 spring for a pull weight of approx. 3 to 3 1/2 pounds #3 spring for a pull weight of approx. 2 1/2 to 3 1/2 pounds#4 spring for pull weight of approx. 1 3/4 to 2 pounds#5 spring for pull weight of approx. 1 1/2 to 2 pounds#6 spring for pull weight of approximate 1 1/2 to 1 3/4 pounds
If you don't have to have the BEST result and could be happy with a dramatic reduction without the honing polishing and advanced work this kit is designed for, be sure to look at our spring and pliers or DIY kits for the G2.
NOTE: Spring weights are only approximate. They will vary from frame to frame and vary according to how you modify or polish the parts. Pull weights shown are only typical approximations. Have more than one frame to do? Simply Order extra spring kits or individual springs as needed. Save A Lot Of Money With This Kit
[ITEMPRICE]