NEW "TRIPLE LOCK" HAMMER EXTENSION DESIGN in SILVER anodized finish.
A TOTAL OF 3 SET SCREWS LOCK THE EXTENSION IN PLACE!
TWO SET SCREWS ENGAGE THE GROOVES IN THE TOP OF THE HAMMER SPUR TO LOCK THE EXTENSION IN PLACE! CANNOT SLIDE FORWARD!CLEARS GRIPS OR BUTTSTOCKS THAT STICK UP ABOVE THE METAL LINE BY LOCKING THE SET SCREWS INTO FORWARD HAMMER SPUR GROOVES.
Our new design fits all Encore variants including ProHunter, FX and Endeavor, G2, and Contender over 195k Serial number that have the selector lever.
Our hammer extension uses a total of 3 set screws, 2 keyed into the grooves on the top of the hammer and the traditional screw from the side.Slots are centered in the extension, and the extension body is round instead of square like the older designs.
FITS ENCORES, G2, AND CONTENDER HAMMERS WITH THE SELECTOR ON TOP...... MEANING, IT FITS ALL VINTAGES OF HAMMERS IN THE BREAK OPEN LINE EXCEPT THE WIDER OLD STYLE CONTENDER HAMMERS WITH NO SAFETY OR THE SQUARE SLIDING CROSS BOLT SAFETY. (See Contender Hammer Extensions for extensions to fit the old models with the wider hammer spur.)
Over tightening the set screw may bend the rather thin hammer spur shank. Our design makes it unnecessary to use excessive force tightening the main set screw on the side. TIRED OF CHEAP, "ONE SIZE FITS ALL" HAMMER EXTENSIONS THAT SIT TILTED ON THE GUN? THE TWO SET SCREWS ON TOP LET YOU ADJUST THE HAMMER EXTENSION SO IT FITS LEVEL WITH THE GUN. Since the factory hammer springs may be only marginally strong enough in some situations with the added weight of a hammer extension, be sure to see our Extra Strength, Speed lock hammer springs: MOUNTS ON EITHER RIGHT OR LEFT SIDE, I'm right handed and prefer the extension on the left side of hammer.
[ITEMPRICE]