Thompson Center Contender or SSK50 Striker
Replace your worn or broken striker with a brand new one. Easy to install, simply remove the trigger guard from the frame by removing the trigger guard stop screw and trigger guard pin. Drive out the 3/32 pin from the trigger guard and remove the striker. I recommend to oil or grease the hole and pin before reinstalling. I also need to mention that now is a great time to replace the striker spring. Install the 3/32 pin far enough to keep the striker spring in place then Carefully align the striker and the striker pin, use a slave 3/32 pin or a pin punch to make sure to keep the hole of the striker and the pin aligned. Carefully tap the pin in the rest of the way.
Designed to fit G1 contender, over 195K serial number, but should also fit the pre 195K with some minor fitting.
We try to keep these on hand but if website says out of stock please call to backorder.