tc encore prohunter tune up kit spi-indicator tuk
The essential items for tuning up all TC Encores and Pro Hunters with the better SPI dial indicator
Our best package for reloaders and anyone seeking the ultimate tune up to your Encores and Pro Hunters. The encore and prohunter frames are the same and use exactly the same parts and procedures. The only difference is the hammer spur, some engraving, and the price.
Here in one place are all the critical items you need to make Encores, Pro Hunters, and G2's work right, backed by over 35 years of experience working with tens of thousands of TC shooters.
Do it yourself, "No Gunsmith Required."
Some "out of the box" TCs shoot just great as they are, but all Encores need some help due to the many variables in barrels, frames, and ammo in the less than perfect Encore interchangeable barrel system.
With any mass produced item, when there is a problem the usual procedure is to "send it back to the factory." However, we have found over and over again that the factory simply does not have the policy or procedures in place to cure problems inherent in their interchangeable barrel, break open system.
Usually you spend about $15 or more sending a problem barrel back to the factory, only to still have the same problem, usually a problem with accuracy or misfires or both with the next barrel when in all probability the first barrel would have shot just fine if given the chance to do so. Often shooters send barrels back many times before either getting lucky or giving up after spending a sinful amount of wasted time and money. I say sinful, because there is something inherently wrong with this picture.
Additionally, TC states that no frame leaves the factory with less than a 5 pound trigger pull, which is hardly suitable for you to do your best shooting.
Included in our Tune Up Kit are the absolutely essential items EVERY Encore shooter must have to make the gun work reliably and accurately. It addresses everything except forend bedding.
Kit consists of Bellm TCs:
1x Oversize Hinge Pin
44# Hammer Spring
Choose your sear/trigger spring from the drop down menu,
Bellm Custom Trigger/Sear Spring Installation Pliers
Feeler Gauge Set
SPI 1" dial indicator
Headspace Indicator Base (Dual purpose for Contenders)
6 hardened, stainless steel Headspace Shims sized for the Encore/ProHunter
1 Heavy Duty Locking bolt spring
1- 3/32" pin punch
Firing Pin Return Spring For Encore, Pro Hunter, Endeavor (not in picture)
Trigger Plunger Return Spring (not in picture)
Encore Trigger Guard Return Spring
While a little over $100 is a lot to spend on top of what the TC guns cost originally, just to make them work right, but it is a situation where you either do it right to start with or pay a lot more later on!Once the investment is made, the money and time saved and the many years of satisfaction these guns deliver are priceless.Make success with Encores a big part of your hunting and shooting experiences. The hunt or the trip to the range is short lived. The memory lasts a lifetime! A $170.00 if purchased separately.Save time money and frustration. All the Essential tools needed to service your Encore in a value packaged kit. No more guessing, order a BELLM TUNE UP KIT.